ESP Primer Makes Paint Stick To Shiny Smooth Surfaces Without Sanding Or Mess. 

PROPERTIES:   

• Cleans old painted or varnished surfaces and leaves a thin film before recoating. 
• Makes oil or water based paints to stick to any smooth non-porous surface. 
• No tiresome or dusty sanding required. 
• May be painted over any time after 2 hours or up to 7 days later. 
• Easy to use. 
• Will not damage old coatings. 
• Reduces surface preparation time.

WHERE TO USE:   

• Lacquers, baked enamels, varnishes, paint, walls, furniture, radiators... 
• Ceramics : bathroom 
• Melamine : kitchen cabinet makeover, furniture 
• Glass 

RECOMMENDATIONS BEFORE APPLICATION   

• Ensure new finish is compatible with the old finish. 
• Do not overcoat with 2 pack finishes, cellulose, xylene and urethane coatings . 
• Remove any loose and flaking old finish. 
• For greasy, waxed or varnished surfaces, scrub surface with a green scourer or 00 steel wool soaked with ESP. Wipe off all ESP after 5-10 minutes then follow application instructions below. 
• Wipe up ESP before drying. Use clean clothes and change them regularly. 
• Do not contaminate new clean ESP with old used ESP. 
• Do not use ESP for dipping. 

APPLICATION   

• Apply a liberal application of ESP. 
• Leave to stand 5 minutes then lightly wipe over the surface in one direction with a clean cloth to remove excess ESP. 
• Allow ESP to dry for 2 hours, before applying the finish. 

 

Coverage when diluted : 18 m²/l 

Application tools : Brush, roller, rag. 

Application temperature : +5°C to +35°C 

Recoating time : 2h to 7 days.  

Clean-up : Water + soap