CLEAR, (Like Water) Non-Peel, Deep Penetrating Oil Finish For Exterior Woods  

Note: It is difficult to explain the 'colour clear' as it will vary depending on the wood type you have. 

The best guide / indication is to place some water on your wood and that will give you a good indication of how Textrol Clear will look on Your wood. (See Textrol Golden Oak and Rustic Oak also)

Penetrating oil finish / decking oil for weathered wood which protects against moisture and UV damage

• Developed for weathered wood
• Penetrates and protects from within the wood
• Non film forming – will not crack, peel or flake
• Protects against moisture and UV damage
• Easy one coat maintenance – no stripping or sanding

Properties

• Use on horizontal and vertical surfaces.
• Penetrates and protects from within the wood.
• Excellent penetration- Textrol should be in the wood not on the surface.
• Non-film forming – will not crack, peel or flake.
• Protects against moisture and UV damage.
• Quick and easy to apply – “wet on wet” application.
• Provides mildew resistance.
• Easy maintenance – no stripping or sanding.

Destination

• Soft or hardwoods: Cedar, Larch, Pine (pressure treated or not), Ash, Oak …
• Can be applied to both horizontal surfaces (decks, walkways ,…) and vertical surfaces (cladding, shingles, fences…) and other exterior wood structures
• Do not use on new wood - use SEASONITE instead.

Application

• Apply an application of Textrol and allow it to penetrate for 15-30 minutes.
• Apply a second application and allow it to penetrate for 15-30 minutes.
• Repeat this procedure until the wood is saturated i.e. will accept no more oil.
• Do not allow Textrol to become touch dry or dry between coats (apply “wet on wet”).
• Once the timber is saturated, always brush out or wipe up any excess product that has not penetrated to avoid shiny spots.
• The appearance of Textrol gradually lightens over time due to exposure to the sun and UV rays. When the wood has lightened to a light grey colour, it is time for a maintenance application.
• Refer to the packaging for maintenance procedure.

Multicoat coverage : 5 m²/l

Coverage rate for maintenance : 10 to 12 m²/l

Application tools : stiff bristle - brush - airless spray

Application temperature : 5°C to +35°C 

Working time : 24 to 48 h.
Clean-up : White-Spirit

Colours available : 

Clear (like water)

Golden Oak 

Rustic Oak