Deep Penetrating, Non-Peel Oil Finish For Exterior Woods, Rustic Oak 

Textrol Rustic Oak is the darkest of the three Textrol's. Somewhat reddish in shade. Has a darker / hardwood type look and because it has more pigment in it that the other two Textrol's, it is the longest lasting from point of view of fading from UV etc.  

Note: Images may be any of the 3 Textrol shades. (Darkest of three above is indication of Rustic Oak) 

Penetrating oil finish / decking oil for weathered wood which protects against moisture and UV damage  

• Developed for weathered wood  
• Penetrates and protects from within the wood  
• Non film forming – will not crack, peel or flake  
• Protects against moisture and UV damage  
• Easy one coat maintenance – no stripping or sanding

Properties  

• Use on horizontal and vertical surfaces.  
• Penetrates and protects from within the wood.  
• Excellent penetration- Textrol should be in the wood not on the surface.  
• Non-film forming – will not crack, peel or flake.  
• Protects against moisture and UV damage.  
• Quick and easy to apply – “wet on wet” application.  
• Provides mildew resistance.  
• Easy maintenance – no stripping or sanding.

Destination  

• Soft or hardwoods: Cedar, Larch, Pine (pressure treated or not), Ash, Oak …  
• Can be applied to both horizontal surfaces (decks, walkways) and vertical surfaces (cladding, shingles, fences) and other exterior wood structures  
• Do not use on new wood – use Seasonite instead.

Application  

• Apply an application of Textrol and allow it to penetrate for 15-30 minutes.  
• Apply a second application and allow it to penetrate for 15-30 minutes.  
• Repeat this procedure until the wood is saturated i.e. will accept no more oil.  
• Do not allow Textrol to become touch dry or dry between coats (apply “wet on wet”).  
• Once the timber is saturated, always brush out or wipe up any excess product that has not penetrated to avoid shiny spots.  
• The appearance of Textrol gradually lightens over time due to exposure to the sun and UV rays. When the wood has lightened to a light grey colour, it is time for a maintenance application.  
• Refer to the packaging for maintenance procedure. 

  
Multicoat coverage : 5 m²/l   

Coverage rate for maintenance : 10 to 12 m²/l  

Application tools : stiff bristle - brush - airless spray   

Application temperature : 5°C to +35°C    

Working time : 24 to 48 h.     

Clean-up : White-Spirit