Problem Solvers - Bursting with Scores of hard to come by maintenance tips! That Magic Ingredient  The MUST have for every DIY enthusiast!  Probably The Most Amazing Property Maintenance Product Ever Found In A Can! 74 Little Known Secret Solutions To Your Most Costly, Frustrating Home Painting & Maintenance Headaches
353-1-830 22 50 353-1-830 22 50 top_icon_facebook Cart icon €0.00
  • Home
  • Specially Developed To Clean Composite Wooden Decking Etc.
    € 25.86
    Price Excl. Vat @ 23%

    Owatrol Compo-Clean 2.5LISSN: 3297976508266

    Share this
    Facebook Twitter Google Plus

    Cleaner Degreaser For Composite Woods  Water based, Enviro Friendly  

    PROPERTIES:  

    • Waterbased - Environmentally friendly. 
    • Removes surface and ground in dirt. 
    • Fast acting - from 5 minutes depending on the condition of the surface being cleaned. 
    • Gel formula - 
    • Does not run. Easy to apply. Does not contain solvents or paraffin. Will not attack plastic pool liners, stone, glass...    

    WHERE TO USE  

    • Exterior use. 
    • All types of composite wood. 
    • Vertical and horizontal surfaces. 
    • Ideal for grooved decking.    

    PREPARATION  

    • Always test a small area first. 
    • Protect all areas not to be cleaned, plants, shrubs etc including and especially Aluminum parts. 
    • Wear suitable protection - gloves (rubber/nitrile), goggles or visor, clothing.    
    •  

    DIRECTIONS FOR USE  

    • Apply a thick layer of COMPO-CLEAN to the area to be cleaned. Large areas should be cleaned in smaller sections. 
    • Leave the product to work for 5 minutes (longer if necessary depending on the nature of the dirt and contamination). 
    • Scrub with a stiff nylon or synthetic brush. 
    • Rinse with plenty of fresh clean water using the highest pressure source available or use a power washer (max 50 bars). If required repeat above procedure - difficult/stubborn staining. Allow surface to dry 2/3 good drying days before applying chosen finish.      

    Coverage : 5 to 10 m²/l 

    Application tools : brush - roller - hose or pressure washer 

    Application temperature : +5°C to +35°C   

    Working time : 5 min.   

    Clean-up : water 

    Facebook Twitter Google Plus
    E-mail Google PlusLinkedInTwitterYouTube

    IGOE CONCRETE DIY