Gets To The Root Of The Problem... Expels Moisture And Oxygen = Rust Food
Owatrol Solves the root cause of the rust problem. Owatrol penetrates deep down into the smallest micro pores of the metal all the way down to the ‘good steel’ behind, displaces moisture and air from those rust pores as it travels, thereby removing all ‘rust food’ and stops the rusting action.
Whether you are dealing with a steel bridge, vintage tractor, rusty steel railings, fire escape, whatever - the problem is universal and so is the solution.
See the photograph on left with the three pieces of overlapping rusted steel (Marked With A, B, C)
This photograph illustrates one of the most challenging rustproofing scenarios you can imagine, rust in between the steel plates... and the photo clearly shows the penetrating power of Owatrol. Three overlapping steel sections A, B, C covered in rust on what you can see as well as hidden in between the sections out of reach.
Observe Owatrol added to the upper edge of section B, penetrates in between the steel sections, re-emerges out beside the nut (centre) continues down to emerge on to C from the underside of section B. This action expells all traces of moisture and oxygen, or in other words... rust food.
As you can see above, Owatrol Oil gets into places no other rust treatment can get into. They all sit on the surface and are unable to deal with the hidden rust within.
How Does This Compare With Other Rust "Cures"?
Generally speaking, your normal options to treat and restore above scenario would be, wire brushing, shot or sand blasting, needle gun, even sand paper.
In all cases, yes, you can do a good job "ON WHAT YOU CAN SEE".
Unfortunately, all those standard rust treatment methods fail to deal with that HIDDEN rust in between the joints, because they cannot get in there! Owatrol has no trouble at all penetrating in between those sections and in so doing, drives out all hidden, trapped moisture and oxygen, thereby delivering a fatal blow to the rust.
More on this process below…
Because of its unique deep penetrating ability, Owatrol Oil has been found to be one of the greatest solutions ever discovered for the scourge of rust on steel iron. Please allow me to explain.
Firstly, in simple terms (no big words or tech speak) rust develops as a result of the coming together of moisture, oxygen and ferrous steel / iron. A reaction takes place which ultimately causes the steel to break down into the brownish material we call rust.
How Does Owatrol Oil work to Treat / Remove Rust?
It works in a very simple and logical way. When applied to a rusty surface, the Owatrol Oil (which is a lot wetter than water) penetrates all the way in to the ‘good steel’ at the back, and while so doing, it displaces all traces of moisture and oxygen / air [rust food] from within the rusts pores and takes their place drying out to a clear varnish-like, flexible membrane.
In virtually all cases, hidden steel joints, crevices, pores etc contain pockets of moisture and oxygen and despite any known method of removal, such as wire brushing, sand or shot blasting, mechanical guns etc, these ‘pockets’ cannot be reached which means that despite your best efforts, any paint job will result in a fresh outbreak of rust again in those crevices pores in no time at all.
You might imagine that on a good dry day those pockets or pores will not contain moisture or oxygen…
You would be very surprised to discover that usually, despite how good the weather is, those pockets of moisture / oxygen are still in there.
Take the example of the mirror in your bathroom after a shower etc. It becomes fogged up with what is clearly moisture, but yet it will not fall down off the glass because it is not heavy enough.
If you rub one of your fingers along the mirror you will observe that the moisture will gather into a few droplets of water which will have become heavy enough to run down the glass.
That is exactly what Owatrol Oil does inside the rusts’ pores. It pushes out and displaces all traces of moisture and air / oxygen (aka rust food) taking over and occupying those pores completely.
Like water in a glass, when full it is full and you cannot add any more.
Same with the inside of the rust pores, when they have become full of Owatrol oil, they cannot take in anything else such as moisture or even oxygen because the pores are totally full of the oil, which in turn means that the rust, starved if its vital food, cannot return for a very long time indeed.
There are many other better known ‘rust solutions’ out there but none of them can do what Owatrol Oil can do. They all tend to go over the problem. Owatrol Oil deals with the real underlying core issue… removal of ‘rust food’ or the root of the problem from places no which other treatment can get into, thereby preventing return of the rust.
After several years, movement / expansion / contraction, UV rays, wear tear etc will begin to reduce the effectiveness of the Owatrol protection and rust will begin to reappear. Nothing, as we know lasts forever.
Check out the scores of comments from regular users of Owatrol Oil, (refresh page to bring up additional comments)