Owatrol Deks Olje D1ISSN: 3297971108317

Share this

Size:

Saturating Wood Oil, Interior, Exterior, Hard Woods, Boats & And Home Saturating Oil For Interior And Exterior Hardwood With a Clear Satin Finish – Protects From Within

Saturating oil for interior and exterior hardwood with a clear satin finish – protects from within

Ideal for use on new oak and tropical Hardwoods – perfect for dense wood species
Penetrates the wood fully and protects from within
Extremely thin oil which saturates the wood, literally feeding it from within
Easy maintenance – no sanding or stripping
Replaces the natural oils lost from the wood and will not blacken the timber

Properties

Can be applied to both horizontal and vertical surfaces.
Saturates and protects all woods – Soft and Hard; Oily and Dense.
Excellent penetration – non-film forming.
Replaces the natural oils lost from the wood – will not blacken the timber.
Transparent – Enhances the natural grain of the wood.
Deep penetrating, stabilises the wood – Protects against moisture ingress.
Easy maintenance – no sanding or stripping.
Used alone, gives a silken matt finish or overcoat with Deks Olje D2 for a high gloss finish

Where to use

Hardwoods and Tropical Timber : Oak, Chestnut, Teak,Mahogany, Movingui, Ipe, Bangkirai
Softwoods : Pine, Larch, Spruce
Exterior : garden furniture, hardwood windows and doors, patios, walkways, boat decks, topsides on boats, portals …
Interior : paneling, stairs, doors, windows, door frames …
Marine : Can be applied above or below the water line. Excellent primer for conventional single pack marine coatings.
Horizontal – Vertical.

Application

Apply a coat of D1 – Allow to penetrate for 15-30 minutes.
Apply a second application. Allow to penetrate for 15-30 minutes.
Repeat this procedure until the wood is saturated i.e. will accept no more oil.
Once the timber is saturated, brush out or wipe up any excess product that has not penetrated to avoid shiny spots.
Do not allow D1 to become touch dry or dry between coats (apply “wet on wet”).
Refer to the packaging for maintenance procedure.

Multicoat coverage :1 to 4 m²/l

Coverage rate for maintenance :8 to 12 m²/l

Application tools :Brush - Roller

Application temperature :5°C to +35°C

Drying :24 h.

Setting up time before use :3 days.

Clean-up :White-Spirit

"I agonised a long time over the finish but settled on Deks Olje, a synthetic oil. I knew that my boat Grebe was not going to spend very long in the water at a time, so perhaps the finish would not be too critical. Also, at home she was to live in the garage in the same space that she was constructed (sorry, car #2) and so would not be exposed to the elements. I've been very happy with the decision. Coating with Deks Olje is very easy (though it can take a couple of days to dry properly in cold weather). In particular, touching up scratches is almost ridiculously simple - a light sand and a dab of the oil with a cloth or cheap brush and you can't detect where it's been done."
By Name witheld - Boat owner, D1

"We have a large hardwood deck and decided to use the d1 after advice, soaked in and stays natural looking"
By S Casey Home Owner Dublin 15, D1

“We came across Owatrol oil after using Deks Olje D1 a sister product on hardwoods. Now I keep my 69 Wolsey Hornet rust free with Owatrol. Unbeatable I’d say.”
By Bonmahon Joinery restored a 69 Wolseley Hornet, Owatrol Oil Rust

"I've been building wooden boats all my life and the deks D1 is the only oil id use"
By M O'Boyle Boat Builder Donegal, D1

"I used the Deks Olje D1 on my new herringbone pattern, oak floor. I did not want a regular floor varnish - I wanted a more natural look. Yes, I'm happy to say that the Deks Olje D1 did a great job and we're very happy with it"
By A Morton Home Owner Cavan, D1

When the OPW wanted to treat the windows and doors on Stately Home Farmleigh House in Dublin’s Phoenix Park, (visited recently by US President Obama, Queen Elizabeth & many other visiting dignatories), they used Owatrol Deks Olje D1 and D2
By OPW Farmleigh House Dublin, D1

"We used deks D1 on our hardwood garage doors following great advice from Igoe's and I have to say I would'nt use anything else now"
By A Beausang Home Owner Co Dublin, D1

“We used Deks Olje on the standard-finish clinker-built boat we built in the shop where I worked. We never had any complaints. Some of the clients brought the boats back for refinishing every few years and it looked to be working well. Simple to apply...we used a Weed Sprayer, then drained out the excess and put it back into the sprayer for the next boat. These boats were mainly sold in the Pacific NW where UVs are not so much a problem...grin. If I were thinking 'Oil Finish' I'd use it again.”
By D Hanson, D1

Martin said…“We would not dream of using anything else now for varnishing”
By M Bradley Derry Decorator, D1

“The total restoration of the 15th century castle built by the de Burgo clan in Claregalway has taken several years and is nearing completion. Irish green oak wood was selected for all the doors, roof, gallery, windows and following the strong recommendation of the Woodright Paul Price, we treated all the oak with your Deks Olje D1 oil and we are extremely happy with it. Looks great. Call in if you are in the area.
By Mike Herwood Claregalway Castle, D1