Cleans  restores faded wood, stone, concrete, plastics, amazing results.

Wood cleaner and colour restorer – restores greyed, weathered wood to its original look (See Video) 

• Lightens and restores colour to all greyed, weathered wood without bleaching 
• Non-aggressive – harmless to plants, shrubs and surface being cleaned 
• Also cleans and rejuvenates, plastic, gel coat, stone and cement 
• Fast-acting – restores wood to its natural colour in just 15 minutes 
• Can be used as a neutraliser after using Dilunett, Aquanett or another stripper   

Properties 

• Restores colour to all greyed weathered wood without bleaching. 
• Cleans and neutralises staining caused by tannins. 
• Removes all traces of weathering attributed to mould, mildew, pollution … 
• Restores lustre to plastics dulled by weathering and UV rays. 
• Use as a neutraliser after using Dilunett, Aquanett or Prepdeck. 
• Excellent degreaser for tropical hardwoods prior to applying Deks Olje D1 saturator 
• Non aggressive – harmless to plants and shrubs. 
• Biodegradable – Does not contain solvents or bleach – rinse with water.  

Where to use 

• Exterior wood – weathered grey or dirty: Cedar, Larch, Pine (pressure treated or not), Teak, Iroko, Ipe 
• Horizontal or Vertical surfaces : cladding, fences, decks (boat  garden), garden furniture… 
• Other surfaces: rust stained cement, discoloured stone, plastic, GRP.  
• Net-Trol is also used to neutralise a surface after stripping with Dilunett. 
• Net-Trol is used to neutralise after stripping off decking oil etc with Prepdeck (Stripper Cleaner)  

Directions 

• Shake container well before use. 
• Wet surface with fresh, clean water. 
• Apply Net-trol with a synthetic brush or roller (long pile). 
• Agitate surface with a stiff nylon/synthetic brush. 
• Leave to stand for approx 10-20 minutes. If surface starts to dry, dampen with a mist application of water 
• Scrub surface with a stiff nylon/synthetic brush whilst rinsing with water or use a pressure washer (max. 60 bar). 
• If required repeat procedure. 
• Refer to packaging for instructions. 

 

Coverage : 5 to 10m²/l 

Application tools : Stiff bristle - brush 

Application temperature : 5°C to +35°C 

Working time : 5 to 20 min. 

Clean-up : Water