Insulating Additive for All Paints

Thermilate was extremely easy to use, the instructions were very clear, I simply poured it into the paint and stirred. It seemed to have cured the problem, and it actually had a fantastic added benefit for me. I decided to measure the temperature difference in the room, and to my amazement, I found that previously the average temperature in the room was 15c and now it is actually 18c, this was throughout the winter season.
At the moment I'm just finding time to redecorate, so I can use it in the other rooms in the house too, and make the most of the heat savings. Thermilate helped save 3 degrees;  it truly is a fantastic product."

I used the product in my paint when redecorating my bedroom which had quite a bit of mould growth which was causing health issues. After treating the areas with a liquid mould killer, mould resistant primer and adding mould inhibitor to the paint, I also added the thermalite. The process was easy and the finish although slightly fibrous in appearance was fine, I have not had any mould growth since and the walls do appear to be staying a bit warmer.
I only have to replace the radiator as this was only aboutr a third of the recommended power and the room will to all intents and purposes be fine. Whne redecoratin g the rest of the flat I will probably use thrmealite in the paint to try and save monet with the insylating properties. The wall I treated were exterior NW facing walls which always seemed cold before. The room does seem more tolerable and also not as hot in the summer.
Would I recommend the product thermalite? Yes I would and actually have to friends and family. Thanks for what seems like a winner product. Kind regards

“I have a bedroom that can be quite cold and condensation is a problem on the walls. I repainted the walls with emulsion that had Thermilate in it last March and no mould or mildew has reappeared since. I also found that the room was a lot more cosy. Thermilate works, no doubt about it” Maura C Cavan (name with held as requested)

I purchased the Thermilate granules to use in my parents Holiday Chalet.  This is a cold enviroment in general. However, the walls no longer have the usual cold/damp feel to them they had before using the paint additive.  We found it very easy to use and it left a very nice finish to the walls & ceilings.  When the heating is turned on, the Chalet does warm up a lot faster.   We are going to use it on the exterior next year to increase the benefits. Kind regards

I bought some Thermilate from you quite a while ago and I would like to report on the results I had after using the product. I live in an old stone cottage in the Pennines, the sort with thick walls and mullion windows. The mullions consist of a slab of gritstone with a depth of about six inches. Because the stone mullion is both external and internal the inner surface is always cool. As a result, mainly in the bedrooms, condensation appears on the inner surface each morning and encourages the growth of moulds. I had been having problems with this for years with frequent redecoration needed. In spring 2002 I painted the inside of the mullions again, but this time I added Thermilate to the emulsion. The result is that after over one year of use, I have not touched the mullions and the growth of mould is almost negligible. It is definitely a success. My friend lives in Cork and had purchased a house that had some mould on part of the internal walls. Investigation showed that the problem was not caused by rising damp, but was due to the construction of the walls. It appears that many houses there are built with a single leaf of a large concrete blocks. External walls that have poor air circulation, such as behind cupboards, are prone to condensation and mould growth. Last year I gave my friend a packet of Thermilate and he painted it on the affected walls. To date he has had no recurrence of mould growth. Sorry it has taken so long to get this to you, but I wanted to be absolutely sure whether or not the stuff worked before I was prepared to comment on it. Many thanks for your help.

I purchased the paint additive. I used it in an area where there was always condensation and a little dampness. Needless to say the condensation and dampness has gone. The room appears warmer.  One thing I would say, that the additive makes the paint a little grainy, perhaps a way around this is needed.  Best Regards 

"I foster 6 children together with my mum. We've always had a problem with damp caused by condensation, in the hallway...... I'd tried allsorts of products to prevent the condensation coming back. I'd used a paint designed specially for preventing condensation, tried tinfoil before wallpapering, and all sorts of other products. It was important for me to get rid of the condensation because of the children. I then used Thermilate. I used 2 coats in the hallway, nearly a year ago and the condensation has not come back. I then used it in my kitchen where I had a similar problem, I used 2 coats, again it has not come back. I can't believe it, fantastic product, fantastic idea. I absolutely love the product."

Dear Sir or Madam.

Just a note to say thank you for a great product! We used Thermilate on the interior walls and ceilings of our new home. I have steel framed home and wanted to make sure there was no hosting on the walls from hear/cold transfer and that there was minimal loss of heat.

When we got our first gas bill for winter weather I was surprised. It was twice what my neighbours were. I knew my heat wasn't coming on very much and I shouldn't use that much gas. I called the heating contractor immediately. They didn't think that my bill was excessive for the size house I have. (It is 3, 850 Sq. Ft. in size) but with all I had done to be energy efficient 1 felt that my gas

bill was very high!. I also called the insulation people to see if we needed more insulation in the attic. The insulation contractor had me do a few tests, while we were waiting on the Heating and Air-conditioning contractor, to see if we had a lot of heat loss through the ceiling. We had 9" of snow the day before and it was 26 degrees outside so it was a good time to do this type of testing! I had a temperature difference of 8 degrees from the top of the insulation and the attic air temperature, which means I had very little heat loss through the ceiling. Next I checked the temperature difference inside the house between the sitting area and the ceiling. The average was 2 degrees. With ten-foot high ceilings there is usually a 10 deg. temperature difference between the floor and ceiling! . The Insulation contractor was stunned! I then proceeded to tell him about Thermilate and gave him your web address so that he could get more information! The Heating and Air conditioning people finally found the trouble with the heater, it was a bad computer board that was turning on the gas without the thermostat calling for heat so it was burning gas but the dampers didn't open for the heat to go into the house. When it was fixed my gas usage dropped to less than a third of what it was before!

The outside temperature was in the seventies yesterday and the house was 72 degrees inside when we went to bed. When we got up in the morning it was 44 degrees outside and when I checked the gas meter no gas had been used by the heater all night and the inside temperature was still 70 degrees. (Only a 2-degree overnight interior temperature drop!)

I strongly recommend the use of Thermilate for anyone who wants to maintain a comfortable home and who desires to reduce their energy expenses!

Sincerely,

Reference your survey on My purchase of your Thermilete product. I have over 40 years experience in Thermal Insulation applications including  Marine & Industrial painting (On and Offshore) UK and Overseas. At present I have been using your Thermilte powder additive to emulsion paint interior and exterior applications to Wall and Roof tile coating. Internally I have expereinced the benifit of this application and based on application from last winter here in the UK and find it  has positive rsults.. The instructions are simple.., add the contents to 5 Ltrs of paint and  apply coat 2 coats and then apply a final colour of your choce as an final encapulation. Its work's!! So I am pleased about this on my home project..I will also use your product on Marine Contracts that I am estimating on at present. The realality is  you can use your powder  addditive on any application where you require a simple Insulation application with minimum of skill. Regards

Yes I bought the powder additive which I mixed with either dulux paint or crown pain which was to make the bedroom warmer and also to help us with cols pots in corners of the walls which was getting mould which have helped 80%, Its been used to paint our daughters bedroom as in her room it has thin wallpaper so we added this to it to bring the room up to temperature which worked fine. Regards