Owatrol Polytrol

Revives Plastic, Fibreglass, Metal, Paint, Tiles in Minutes. 

• Like a Plastic Polish restores the colour and appearance of dull and faded surfaces caused by exposure to sunlight, rain and pollution 
• Deep penetrating oil that restores the original look and finish to gel coat, plastic, metal and other surfaces 
• Protects against corrosion and blemishes
• On bare metals Polytrol restores the shine and protects against corrosion  

Properties

• Revives the colour and appearance of tarnished and dulled plastics and fibreglass (GRP) (car bumpers, boat hulls, plastic garden furniture, shutters). 
• Restores marble, tiles, tombstones, slate, terracotta tiles where the colour and look has faded. 
• Rejuvinates and restores flat and chalky paint and varnishes dulled by weathering. 
• Restores the shine and protects chrome or polished metals: aluminum, chrome, brass, bronze  

Where to Use 

• Treat small areas in stages to avoid an uncontrolled drying of the Polytrol. 
• Avoid using Polytrol on hot surfaces or direct sunlight. 
• Although Polytrol is not highly flammable, soaked rags should not be discarded as such directly to the trash (risk of self-ignition) leave cloth to dry first in open ventilated place.  

Application 

• Before using Polytrol plastic polish, always make sure the surfaces are dry, clean and free of grease, silicone. If cleaning is necessary, use a solvent on metal or use Net-Trol on plastics. Rinse well and allow to dry for at least 12 hours. Mask areas that are not to be treated. 
• Carefully apply a layer of saturated Polytrol. Beware of runs (for sanding metal surfaces, use fine steel wool, well soaked with Polytrol). 
• Leave on for 10-20 minutes then remove the excess product by wiping with a clean lint free or paper towel. 
• Allow at least 24 hours before use. 

Coverage: 18m²/l  

Application tools : brush - cloth 

Application temperature : +5°C to +35°C 

Working time before wipe off : 10 to 20mn.

Clean-up : White-Spirit